Photos of Painted Metal & Copper Roofs using Gough SnoGuardsTM

TM
TM

SnoGuard.com      Gough SnoGuards   since 1924
 
Home of

Gough SnoGuardsTM 

Use Gough SnoGuardsTM on these types of roofs 

Slate Roofs

About Gough SnoGuardsTM

Installation

Estimating

Why Use Snow Guards?

Contact Us & Terms

Home

 

 

. . . why made in USA?  (Click on flag)

 

Tile Roofs

Asphalt Roofs

Copper &  Standing Seam

 

Type SGAR on Copper Standing Seam Roof (soldered in place)

Type SGAR:  For life-safety, sometimes a "belt & suspenders" approach of snow fence and snow guards is needed.

Type SGPM on Painted Metal Batten Seamed Roof adhered with SB-190 (- much stronger than winter grade Sure Bond.)

Type SGAR soldered on Batten Seamed Copper Roof - Matheson Supreme Court Building - Salt Lake City

TypeSGAR

For new installation on slate, copper, asphalt shingle, etc  If soldering on copper, see video under "Installation" on left.

Type SGPM

For painted metal roofs,.  (Same as SGAR but is of a painted aluminum that  will not discolor.)  Avoids unnecessary metal roof panel penetrations.  Use metal SnoGuards on metal roofs 

Sure Bond 190

Best if applied at a minimum of 50 degrees for a 30 day cure period.  Winter grade is available, but does not have the holding strength as the SB 190.

          SGAR           PDF Cut-Sheet

      SGPM        PDF Cut-Sheet

For adhering SnoGuards to Painted Metal Roofs

3-Part Spec

3-Part Spec

1 Tube Provides Adhesive for approximately 15 SnoGuards.