Gough SnoGuardsTM
Use Gough SnoGuardsTM on these roofs
. . . why made in the USA? (click on flag)
Photos of Slate Roofs using Gough
SnoGuardsTM
Gough SnoGuardsTM
to use on Slate Roofs
|
 |
 |
 |
 |
 |
|
|
TypeSGAR APPLICATION: For new installation on slate, copper & asphalt shingle |
Type SGAR-STR APPLICATION: WITH HOOKED STRAP TO CATCH TOP OF SLATE FOR RETROFIT If you have a random width slate and are concerned about the aesthetic pattern of the snow guards, the hooked strap will allow you to select your position of the snow guard from left to right without being limited to the position of the copper nail of the slate. |
Type SGAR-SLS APPLICATION: WITH SLOTTED STRAP TO HOOK ONTO COPPER NAIL WITH ANY OF SIX POSITIONS FOR RETROFIT This is the easiest to install on slate and is less likely to damage a slate during installation. Custom lengths are available. E.g., maybe longer for wood shakes or extra long slate and shorter if necessary. |
Type SGNL APPLICATION: New installation or retrofit. FOR USE WITH GREENSTONE SLATE COMPANY'S NU-LOK SLATE ROOF SYSTEM. |
Type SGVLS For use with Vande Hey Lightweight (plastic) Slate as well as other synthetic slates. Must specify manufacturer and slate model. |
Type SGPJ The Plain Jane is actually a SGAR made of Kynar colored aluminum and comes in whatever color we have in stock. Therefore, they are a little less expensive.
|
|
SGAR PDF Cut-Sheet |
SGAR-STR PDF Cut-Sheet |
SGAR-SLS PDF Cut-Sheet |
|
SGVLS PDF Cut-Sheet |
SGPJ PDF Cut-Sheet |
|
3-Part Spec for New Slate |
3-Part Spec |
3-Part Spec for Retrofit Slate |
3-Part Spec SGNL |
3-Part Spec SGVLS |
3-Part Spec SGPJ |
